Enterasys-networks Enterasys Diamond Distributed Forwarding Engine 7K Bedienungsanleitung PDF herunterladen (Seite 58)

Memory Locations and Replacement Procedures

B-4 Mode Switch Bank Settings and Optional Installations

3. PulltheDRAMSIMMstraightupandremoveitfromtheconnectorfingers.

Installing the DRAM SIMM

ToinstallaDRAMSIMM,refertoFigure B‐4andproceedasfollows:

1. PushtheconnectorarmsawayfromtheDRAMSIMMenoughtoinserttheDRAMSIMMinto

theconnectorfingers.

2. InserttheDRAMSIMMstraightdownbetweentheconnectorfingersenoughforthetabson

theconnectorarmstoalign

withthetwoDRAMSIMMalignmentnotches.

3. PushtheDRAMSIMMdownintothe connectorfingers.Thenrotatethetwoconnectorarms

towardtheDRAMSIMMtolockitintoplace.

Figure B-3 Removing the Existing DRAM SIMM

1 Connector arms 2 DRAM SIMM 3 Connector fingers

Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive electronic

equipment.

Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones de

seguridad para evitar descargas de electricidad estática.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 64

Keine Kommentare

Enterasys-networks Enterasys Diamond Distributed Forwarding Engine 7K Bedienungsanleitung Seite 58