Enterasys Networks CSX7000 Bedienungsanleitung PDF herunterladen (Seite 134)

100

101

USER’S GUIDE

134 CyberSWITCH

l. IP RIP receive control

m. IP RIP v2 authentication control

n. IP RIP v2 authentication key (required only if the IP RIP v2 authentication control has been

configured with a value other than “No Authentication”

Note: With the Secondary IP Addressing feature, you may add more than one LAN network

interface. Upon adding a second LAN interface, you must provide a unique interface

name and address. You will also need to specify whether this new interface is to be the

primary or secondary LAN network interface. Refer to Multiple IP Addresses in the

Background Information for usage details.

3. For a WAN IP network interface enter the following information:

a. interface name

b. IP address assigned to this interface

c. subnet mask

d. MTU size

e. transmit broadcast address

Note: If this interface uses RIP over a dedicated connection, select “Specific Explicitly” for the

transmit broadcast address. You will then enter one address. This is because the system

can only exchange RIP packets with one device over this type of connection. Refer to

IP RIP over Dedicated Connections for more information.

If IP RIP is enabled, enter the following additional information:

f. the transmit broadcast IP address (requested if you selected “Specify Explicitly” for the

transmit broadcast address)

g. IP RIP host routes propagation scheme

h. RIP send control

i. RIP receive control

j. RIP respond control

k. IP RIP v2 authentication control

l. IP RIP v2 authentication key (required only if the IP RIP v2 authentication control has been

configured with a value other than “No Authentication”

4. For a WAN (Direct Host) IP network interface enter the following information:

a. Direct Host interface name

b. associated LAN interface

c. MTU size

5. For a WAN (RLAN) IP network interface enter the following information:

a. interface name

b. IP address assigned to this interface

c. subnet mask

d. packet encapsulation type

e. MTU size

f. enable/disable Proxy ARP feature

g. transmit broadcast address

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 728 729

Kommentare zu diesen Handbüchern

Keine Kommentare

Enterasys Networks CSX7000 Bedienungsanleitung Seite 134

Kommentare zu diesen Handbüchern