Enterasys Networks CSX7000 Bedienungsanleitung PDF herunterladen (Seite 512)

100

101

USER’S GUIDE

512 CyberSWITCH

[IP RIP] All network interfaces used

All RIP interface data structures are in use. No RIP information will be sent to any additional

interfaces. Contact your Distributor or Customer Support.

[IP RIP] Buffers allocated

The RIP successfully allocated the UDP buffers needed to transmit RIP packets.

[IP RIP] Initialization failed, unable to allocate buffers

The RIP initialization was not completed. The machine contains insufficient memory to allocate the

UDP buffers needed to transmit RIP packets. Contact your Distributor or Customer Support.

[IP RIP] RIP Protocol Initialization successful

The RIP protocol was successfully initialized.

[IP RIP] Route Maintenance Registration Failed

The IP RIP protocol was unable to register with the IP routing table notification system. Any

dynamic changes of the routing table configuration will not be reflected in the RIP packets sent to

other routes. contact your Distributor or Customer Support.

[IP RIP] Send queue full

The RIP transmission queue has become full. This is not a normal occurrence. The machine should

be restarted. If this message is displayed again after the machine has been restarted, contact your

Distributor or Customer Support.

[IP RIP] Shutdown complete

The RIP protocol was successfully shutdown via Dynamic Management. No RIP routing

information will be transmitted or received. Any routes learned via RIP will soon expire.

[IP RIP] Unable to add host route <IP address>

A failed attempt was made to add the host route to the IP RIP routing table. The routing table can

have approximately 300 routing entries, and at this time, the routing table is full. The host route will

not be broadcast via RIP packets and therefore other routers will not be able to learn the route to

this device. You can use the packet capture commands to try to determine if a device is advertising

an unusual number of routes. If you are unable to track down the problem, contact your Distributor

or Customer Support.

[IP RIP] Unable to add route, routing table full

The IP RIP routing table is currently full, no new routes can be added. The routing table can have

approximately 300 routing entries, and at this time, the routing table is full. This could result in

possible unreachable destinations. You can use the packet capture commands to try to determine

if a device is advertising an unusual number of routes. If you are unable to track down the problem,

contact your Distributor or Customer Support.

[IP RIP] Unable to open RIP/UDP port 520

The UDP port for RIP was unable to be opened. There are 63 possible UDP ports, and none are

available for use at this time. No RIP information can be transmitted or received. Contact your

Distributor or Customer Support.

[IP RIP] Unable to register WAN Connection notification

The IP RIP protocol was unable to register with the IP WAN interface connection notification

system. No WAN connection information will be reflected in the RIP packets. Contact your

Distributor or Customer Support.

1 2 ... 507 508 509 510 511 512 513 514 515 516 517 ... 728 729

Kommentare zu diesen Handbüchern

Keine Kommentare

Enterasys Networks CSX7000 Bedienungsanleitung Seite 512

Kommentare zu diesen Handbüchern