Enterasys-networks 8000/8600 Bedienungsanleitung PDF herunterladen (Seite 108)

Loading System Image Software

96 Enterasys X-Pedition 8000/8600 Getting Started Guide

Loading System Image Software

The X-Pedition operates using the system image software installed in its internal flash chip. To

upgrade the system software and operate using the upgraded image, use the following procedure:

1. Enter the enable command in the CLI to enter Enable mode.

2. To display the current boot settings, enter the system show version command.

Note: In this example, the location “slot0:boot” indicates that the X-Pedition is set to use the

factory-installed system software in the motherboard’s internal flash chip.

3. Copy the software upgrade you want to install onto a TFTP server that the X-Pedition can

access. Use the ping command to verify that the X-Pedition can reach the TFTP server.

4. Enter the system image add command to copy the software upgrade onto the X-Pedition’s

internal flash chip.

5. Enter the system image list command to verify that the new image exists on the internal flash

chip.

6. Use the system image choose command to select the image file the X-Pedition will use the

next time you reboot.

7. Enter the system image list command to verify the change.

Note: You do not need to activate this change.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 141 142

Keine Kommentare

Enterasys-networks 8000/8600 Bedienungsanleitung Seite 108