Enterasys-networks 8000/8600 Bedienungsanleitung PDF herunterladen (Seite 46)

Hardware Overview

34 Enterasys X-Pedition 8000/8600 Getting Started Guide

Per-port Link Green The port hardware detects a cable plugged into the port and a

good link is established.

Red

(intermittent)

Indicates that the port received an error during operation.

Red (solid) The port hardware detected a cable plugged into the port,

however, a bad link is established.

Off Indicates that no link from the port exists.

Per-port Rx Green The port’s transceiver received a packet.

Amber The port’s transceiver received a flow-control packet.

Per-port Tx Green The port’s transceiver transmitted a packet.

Amber The port’s transceiver transmitted a flow-control packet.

Per-port AN Green Green – indicates that the line card has auto negotiated the

operating mode of the link between full-duplex and half-

duplex.

Amber

(intermittent)

Amber (intermittent) – indicates that Auto-Negotiation is in

process.

Amber (solid) Indicates a problem with Auto-Negotiation configuration.

Red Indicates an Auto-Negotiation failure. This fault may occur if

the link partner does not support full duplex.

Off Auto-Negotiation was been disabled or the link is down.

Table 7. SSR-GLX70-01-AA and SSR-GLH39-02 line card LEDs (Continued)

LED Condition Description

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 141 142

Keine Kommentare

Enterasys-networks 8000/8600 Bedienungsanleitung Seite 46