Enterasys Networks CSX7000 Bedienungsanleitung PDF herunterladen (Seite 599)

100

101

Central Site Remote Access Switch 599

YSTEM

OMMANDS

Frame Relay Commands

Slot number refers to the slot in which the digital modem card resides, and all refers to all

modems on the card. Example: modem upgrade 2 all upgrades all modems on the DM card in slot

We recommend you monitor the upgrade process by using the

console command. The

upgrade process should take approximately one minute. Only after the upgrade process

completes for all modems, reset the system.

Note: DO NOT DISRUPT POWER during the execution of the modem upgrade process! If

power is disrupted, it could result in damage to the modem.

modem devices

Displays active digital modem connections by device name. Lists slot number, modem

number, and in the case of the DM-24 or DM-30, lists connect parameters.

FRAME RELAY COMMANDS

The following commands are used to display information concerning both the status and traffic

statistics of a particular frame relay connection.

fr a <access n>

Sets an internal variable. The frame relay

will be the assumed current access for

all subsequent frame relay system console commands entered. <Access n> will remain the

current access, until it is changed through issuing another

fr a <access n>

command. The

<access n> is the access index that is assigned to each frame relay access during the frame relay

access configuration.

Note that this command may be used in conjunction with all other

commands. For example,

fr a 1 lmi

would be a valid command, changing the frame relay access to 1 before

displaying information relating to the LMI link.

fr d <DLCI m>

Sets an internal variable.

will be the default DLCI under the currently-selected

access, and therefore the assumed context for all subsequent frame relay system console

commands entered. <DLCI m> will remain the default DLCI until the default is changed

through reissuing the

fr d <DLCI m>

command. The DLCI value is provided by the service

provider at line subscription time.

For the following frame relay commands, information is displayed for the currently selected access.

However, you may also change the access (which, in turn, changes the default) by using these

commands along with the access index command. Refer to the

fr a <access n>

command.

fr display

Displays the configuration information as entered during the last CFGEDIT session for the

currently-selected frame relay access. Note that this also includes any configured PVCs

associated with this access.

fr stats

Displays the statistics associated with the currently-selected access and DLCI. Refer to Frame

Relay Statistics, for a list of available statistics and their definitions.

1 2 ... 594 595 596 597 598 599 600 601 602 603 604 ... 728 729

Kommentare zu diesen Handbüchern

Keine Kommentare

Enterasys Networks CSX7000 Bedienungsanleitung Seite 599

Kommentare zu diesen Handbüchern