Enterasys Networks CSX7000 Bedienungsanleitung PDF herunterladen (Seite 456)

100

101

USER’S GUIDE

456 CyberSWITCH

2. If Remote Mac appears in Select a file server: box, then AppleTalk Routing over the WAN

connection is operational.

3. If Remote Mac IS NOT displayed, then AppleTalk Routing feature over the WAN connection

is not operational, try the following:

a. Verify that AppleTalk Routing is operational on both the local and the remote LAN.

b. Verify that the remote resources (remote Mac) can be seen when the WAN connection is

up.

c. If the remote resources can be seen when the connection is up but not when the connection

is down, there are some problems with making outbound calls. Make sure that the

information on the remote CyberSWITCH (labeled Site 2 in the example network) contains

a proper AppleTalk address, and that Make calls for AppleTalk data for the device is enabled.

d. If the remote resources can not be seen even when the connection is up, then make sure the

AppleTalk address of the remote device is valid. If the remote device is on an unnumbered

network, then AppleTalk an address of 0.0 must be configured for the remote device in the

device table. If it is on a numbered network, the AppleTalk address does not need to be

configured for the device in the device table. However, if it is configured, it must match the

AppleTalk address configured on the remote device.

1 2 ... 451 452 453 454 455 456 457 458 459 460 461 ... 728 729

Kommentare zu diesen Handbüchern

Keine Kommentare

Enterasys Networks CSX7000 Bedienungsanleitung Seite 456

Kommentare zu diesen Handbüchern