Enterasys Networks CSX7000 Bedienungsanleitung PDF herunterladen (Seite 513)

100

101

Central Site Remote Access Switch 513

YSTEM

ESSAGES

System Message Summary

[IP RIP] Unable to register with Network Interface Maintenance

The IP RIP protocol was unable to register with the IP network interface notification system. Any

dynamic changes of the network interface configuration will not be reflected in the RIP interface

control. Contact your Distributor or Customer Support.

[IPX] Invalid IPXWC passed

In the unlikely event this message is posted, contact your Distributor or Customer Support.

[IPX] Network initialized successfully on xxxxxxxx:xxxxxxxxxxxx

This message is posted when the numbered interface is successfully initialized on the indicated IPX

address.

[IPX] Network Interface on LAN port <port #> not initialized

The network interface for the LAN port indicated was not initialized because there is no Ethernet

resource configured, or the Ethernet resource that is configured does not have the corresponding

port. You should correct the system configuration.

[IPX] Route <IPX network address #1> not added: invalid next hop(<IPX address #2>

The static route entry indicated by the <IPX network address #1> was not added in the IPX routing

table because the next hop indicated by the <IPX address #2> is not located on any network directly

connected to the configured network interface.

[IPX] Route (<IPX network address>) not added: invalid next hop (<name>)

The static route entry indicated by the <IPX network address> was not added in the IPX routing

table because the next hop remote device indicated by the <name> does not exist.

[IPX] IPX router initialized successfully

This message is posted when the IPX Router feature has initialized successfully.

IPX spoofing unable to get disconnect time structure. Default options replacing disconnect time options for

device <device name>.

The resources required to properly perform the configured IPX spoofing options for the specified

device after a connection to this device has been disconnected could not be obtained. The default

IPX spoofing options are being used in place of the disconnect time IPX spoofing options.

[IPX RIP] Buffers allocated

The IPX RIP successfully allocated the buffers needed to transmit IPX RIP packets.

[IPX RIP] RIP Protocol Initialization successful

The IPX RIP protocol was successfully initialized.

[IPX RIP] Shutdown complete.

The IPX RIP protocol was successfully shutdown via Dynamic Management. No IPX RIP routing

information will be transmitted or received. Any routes learned via IPX RIP will soon expire.

[IPX RIP] Space available in routing table

A route entry has become available in the full route table.

[IPX RIP] Unable to add route, routing table full

The route table has become full. The maximum number of route entries should be increased. Note:

This message will not recur in the log until space becomes available in the route table.

1 2 ... 508 509 510 511 512 513 514 515 516 517 518 ... 728 729

Kommentare zu diesen Handbüchern

Keine Kommentare

Enterasys Networks CSX7000 Bedienungsanleitung Seite 513

Kommentare zu diesen Handbüchern